Test of an electrical generator retrofitted with the PMC
All informations and diagrams are published freely (freeware) and are intended for a private use and a noncommercial use
Created on 01-06-01 - JLN Labs - Updated on 04-12-03
Version Franšaise

December 30th, 2000 : Successful tests of a 600 Watts Electrical Generator with a 78 cm3 ( 4 strokes engine ) retrofitted with the Pantone's Multi-Fuels Processor ( Construction and Tests by Claude and Philippe Driot (France) ).

A 600 Watts power generator ( Honda 24 Volts with a 78 cm3, a 1 HP / 4 strokes engine ) has been retrofitted successfully by Claude and Philippe Driot according to the Multi-Fuels Processor diagram published freely on this web site ( see at the bottom of this page ). In spite of the big size of the reactor chamber used ( normally used for a 10 HP engine ), the engine has started without difficulties with a mixture of 75% water and 25% 'super' gasoline. The device has run at full speed during all the test ( 6000 RPM ).

These first tests of the retrofitted engine are very encouraging and fully in line with the original Pantone's claim. A smaller reactor chamber is under developpement for this device, this will increase the pyrolitic effect on the water in the reaction chamber. We have noticed during these tests that the temperature of the reaction chamber isn't sufficiently high for the best pyrolitic effect due to the smaller size of the engine used.

Click on the diagram above to enlarge

Click here to download the full GEET 5kW Fuel Processor printable diagram ( in Adobe Acrobat PDF format )

See the video of the test with a mixture of 75% water and 25% 'super' gazoline

Download the Video of the test ( size 1.05 Mb )

To see this video, the free downloadable RealPlayer is required

Note from Jean-Louis Naudin : CONGRATULATIONS to Claude et Philippe Driot for their successful replication and tests.

Back to BingoFuel Project home page